Knowledge
Steel Knowledge
Explore steel materials and properties, metallic coatings, corrosion mechanisms, comparisons, dimensions, processing, pipe and tube, stainless steel and grades.
Articles: 41
Start Here
Knowledge · Explanation
Does Stainless Steel Rust?
Stainless steel can rust when its passive film breaks down. Learn how chlorides, crevices, contamination and grade choice affect 304 and 316.
Knowledge · Explanation
Steel Density: Carbon, Stainless & Alloy Steel
Find typical densities for carbon, stainless and alloy steel in kg/m³, g/cm³ and lb/in³, with grade examples and practical weight formulas.
Knowledge · Explanation
What is galvanizing?
Learn how zinc is applied through batch hot-dip, continuous sheet and electrolytic processes, and how the coating protects exposed steel.
All Knowledge
-
Read article
Mill Edge vs Slit Edge Steel
Understand mill, trimmed and slit steel edges, follow both sides of a daughter strip, and distinguish edge history from finishing and acceptance.
-
Read article
Steel Coil Width and Width Tolerances
Understand nominal coil width, permitted deviations, product and edge conditions, and why strip width differs from coil-face alignment and usable width.
-
Read article
Standard Steel Sheet Sizes and Dimensions
Compare nominal steel sheet width and length formats, exact inch conversions, supplier ranges and the dimensions needed for a usable cutting blank.
-
Read article
Steel Plate Thickness and Tolerances Explained
Interpret plate thickness limits, within-plate variation, dimensional references and measurement conditions without treating one tolerance as universal.
-
Read article
Steel Leveling vs Flattening
Understand overlapping leveling and flattening terms, roller and stretch processes, and why delivery flatness does not prove stability after cutting.
-
Read article
Cut-to-Length Steel Processing Explained
How cut-to-length lines turn steel coil into sheets, coordinate feeding and shearing, and separate length, squareness, flatness and surface checks.
-
Read article
Steel Coil Slitting Explained
How steel coil slitting coordinates uncoiling, rotary knives, strand separation, tension and recoiling, with clear limits on what the process establishes.
-
Read article
Temper Rolling / Skin Pass Explained
How temper rolling and skin passing change yielding, surface texture and flatness, and why steel grade, prior processing and ageing affect the result.
-
Read article
Corrosion Categories C1–C5 and CX Explained
Understand C1–C5 and CX through first-year metal loss, atmospheric assessment, ISO 9223 and ISO 12944, and the limits of service-life estimates.
-
Read article
Galvanic Corrosion Between Dissimilar Metals
Understand galvanic corrosion through electrical and electrolyte paths, wetted area ratio, coating defects, isolation and drainage controls.
-
Read article
Galvanized vs Galvannealed Steel
Compare GI and GA steel sheet by alloying process, coating behaviour, painting, forming, resistance spot welding and the limits of corrosion comparisons.
-
Read article
Hot-Dip Galvanized vs Electro-Galvanized Steel
Compare hot-dip galvanized and electrogalvanized steel sheet by coating process, zinc mass per side, surface finish and fabrication requirements.
-
Read article
Ductility, Toughness and Brittleness of Steel
Understand steel elongation, Charpy energy and fracture toughness, including units, specimen effects, brittle behavior and test-report limits.
-
Read article
Thermal Conductivity of Steel
Compare steel thermal conductivity at stated temperatures, calculate plate heat flow, and separate conductivity from conductance and diffusivity.
-
Read article
Thermal Expansion of Steel
Calculate steel thermal expansion with scoped coefficients, mean versus instantaneous values, unit conversions, stainless examples and restraint limits.
-
Read article
Modulus of Elasticity of Steel
Understand steel Young’s modulus, units, strength versus stiffness, temperature effects, ASTM E111 and worked axial and beam-deflection examples.
-
Read article
Steel Hardness Explained
Understand steel hardness, how Brinell, Rockwell and Vickers tests differ, what changes a reading, and how to interpret hardness conversions with proper scope.
-
Read article
Austenitic vs Ferritic vs Martensitic Stainless Steel
Compare austenitic, ferritic and martensitic stainless steel by microstructure, magnetism, heat treatment, corrosion, fabrication and typical uses.