Guides
Fabrication & Finishing
Plan cutting, forming, welding and surface preparation.
Articles: 15
All Guides
-
Read article
How to Remove Heat Tint from Stainless Steel
Select a qualified treatment for stainless weld heat tint, account for roots and finish, and verify cleanliness and corrosion-related requirements.
-
Read article
How to Drill Stainless Steel Sheet
Choose a suitable drill, support thin stainless sheet, set tool-specific cutting data and control breakthrough, work hardening, burrs and hole quality.
-
Read article
Sheet Metal Punching Guide
Set up sheet-metal punching by material, thickness, punch-to-die clearance and tooling condition, then control burrs, hole quality, distortion and repeatability.
-
Read article
How to Reduce Springback in Sheet Metal Bending
Reduce sheet-metal springback by controlling material, bend radius, die opening, tooling and forming method, then validate compensation on representative parts.
-
Read article
Plasma Cutting Steel: Thickness, Quality and Distortion
Set up plasma cutting for steel by thickness, cut chart, speed, torch height and consumables. Diagnose dross, bevel, heat effects and distortion, then inspect the finished edge.
-
Read article
Sheet Metal Shearing Guide
Set up sheet-metal shearing by material, thickness, clearance, rake and support. Inspect burr, distortion and dimensions, and plan safe production.
-
Read article
Bend Allowance and K-Factor Guide
Calculate sheet-metal bend allowance, outside setback and bend deduction, then calibrate K-factor from the actual material, radius and forming setup.
-
Read article
How to Polish Stainless Steel Sheet
Polish stainless steel sheet to a controlled directional, satin, bright or mirror finish while managing defects, abrasive steps, heat and contamination.
-
Read article
How to Choose Sheet Metal Bend Radius
Choose a sheet-metal bend radius from material grade, thickness, strength, rolling direction, tooling, process, edge condition and part requirements.
-
Read article
Laser Cutting Steel Sheet: Material, Thickness and Edge Quality
Specify laser cutting of steel sheet by material, thickness, assist gas, edge condition, geometry, heat effects and downstream fabrication requirements.
-
Read article
How to Bend Sheet Metal: Method, Radius, Tooling, Springback, and Safety
Choose a sheet-metal bending method and check radius, tooling, rolling direction, springback, surface protection, capacity and safety before production.
-
Read article
How to Cut Sheet Metal: Choosing Snips, Shears, Saws, Laser, Plasma, and Waterjet
Choose a sheet metal cutting method by material, thickness, shape, edge quality, heat input and production needs. Compare snips, shears, saws, laser, plasma and waterjet.
-
Read article
How to Weld Galvanized Steel Safely
A practical galvanized-steel welding workflow covering zinc-fume control, coating preparation, weld inspection and corrosion-protection repair.
-
Read article
TIG vs MIG Welding Stainless Steel: Which Process Should You Use?
Compare TIG and MIG for stainless steel by thickness, root control, shielding gas, heat input, weld appearance and production rate to choose the right process.
-
Read article
How to Weld Stainless Steel
Weld stainless steel by identifying the grade, choosing the right process and filler, preventing contamination, controlling heat, shielding the root and restoring the finished surface.