Guides
Ordering & Inspection
Prepare purchase requirements and inspect incoming steel.
Articles: 10
All Guides
-
Read article
Steel Coil Packaging, Storage and Handling Guide
How to store steel coils: orientation, chocks and stack height, condensation and white rust, storage time limits and safe handling, per HSE, BlueScope and ECCA.
-
Read article
How to Compare ASTM and EN Steel Specifications
Compare ASTM and EN steel requirements with a traceable evidence matrix, preserved test conditions and authorized decisions on unresolved differences.
-
Read article
How to Verify Galvanized Coating Weight
Verify supplied galvanized sheet and coil coating mass through traceable specimens, applicable methods, individual results and documented acceptance.
-
Read article
How to Specify Flatness, Camber and Squareness
Specify separate steel shape requirements with agreed documents, measurement conditions, limits and evidence before placing an order.
-
Read article
How to Specify Coil ID, OD, Width and Weight
Turn verified receiving-line limits into a per-coil supply window, distinguish net mass from handling load, and resolve supplier exceptions before ordering.
-
Read article
How to Check Steel Thickness and Tolerance
Measure steel thickness with the right gauge, consistent contact and recorded locations, then compare readings with the tolerance before acceptance.
-
Read article
Common Steel Sheet Surface Defects and How to Identify Them
Identify steel-sheet surface imperfections by shape, location and pattern; distinguish possible causes, record evidence and assess against agreed requirements.
-
Read article
How to Inspect Steel Sheet and Coil on Delivery
Inspect delivered steel sheet and coil by identity, physical condition, quantity and dimensions; record coverage limits and resolve discrepancies before release.
-
Read article
How to Read a Steel Mill Test Certificate (MTC/MTR)
Check a steel mill test certificate against material identity, test conditions and order requirements, then resolve missing evidence before release.
-
Read article
How to Specify Steel Sheet and Coil Correctly
Build a complete steel sheet or coil specification covering product, grade, dimensions, tolerances, coating, coil limits, inspection and traceability.